÷
3. Press _ or _ to display the V-CHIP menu.
vocHi_ i ,,
BLOCKING RESET
SELECT [0-9] SET ENTER
END EXIT
4. Use the Channel Number buttons (0-9) to enter your PIN code.
If you are accessing the V-Chip menus for the first time, seiect a
four-digit number to be your PIN code. Press ENTER. The
BLOCKING menu appears.
Note:
ff you for£et your PIN code, press RECALL
four times within five seconds from the V-CHIP
menu, This allows you to proceed to the
BLOCKING menu and resets your PIN code,
÷
_ONOFF
SET RATING START
BLOCKING OPTION START
NEW PIN CODE START
SELECT A V ADJUST _
5. You may now enable blocking. See "Blocking programs by ratings"
(below), "Locking channels" (page 22), "To change your PIN code"
(below), or "Blocking unrated movies or programs" (page 22).
To change your PiN code:
1. Press MENU, then press _ or _ to display the OPTION menu.
2. Press A or V to highlight V-CNIR
3. Press 41or _ to dispiay the V-CHIP menu.
4. Use the Channel Number buttons (0-9) to enter your PIN code.
Press ENTER. The BLOCKING menu appears.
5. Press ,A or V to highlight NEW PIN CODE and press 4 or _ to
dispiay the NEW PIN CODE menu.
6. Use the Channel Number buttons (0-9) to enter a new code.
Press ENTER.
7. Press EXIT to return to normal viewing.
Blocking programs by ratings
The Motion Picture Association of America (MPAA) uses a rating
system to qualify motion picture content. Television broadcasters
empioy a rating system to qualify the content of television programs, as
well. The MPAA, Youth TV, and TV ratings work with the V-Chip feature
and allow you to block programs according to the rating limits you set.
- Channel
Menu/
Enter
Recall
Exit
÷
19
3N42601A[E] P17-28
÷
1/24/04, 3:36 PM
To Next Page
Loading...
