Toshiba 27a44 - Page 24

÷
Labeling channels
Channel labels appear over the channel number display each time you
turn on the TV, select a channel or press the Recall button. "Youcan
choose any four characters to identify a channel.
To create channel [abems:
1. Select a channel you want to label.
2. Press MENU, then press 4 or P until the OPTION menu appears.
3. Press _ or V to highlight CR LABEL.
LANGUAGE ENGUSH
FAVORITE CH START
V-CH_P START
LOCK START
ONiOFFTIMER OFF
COLORSTREAM DVD
SELECT _,_F START _ _*
4. Press 4 or _ to display the CH LABEL menu. SET/CLEAR wH[ be
highlighted.
Ohannel
Numbers
- Menu/
Enter
-- Exit
÷
_SE CLEAR
LABEL ....
SELECT "_ _" SET ENTER
END EXIT
5. Press 4 or _ to highlight SET.
6. Press _. or V to highlight LABEL.
÷
SET CLEAR SET
SELECT _ _> SET ENTER
END EXIT
9.
10.
Press 4 or _ to enter a character in
the first space. Press the button
repeatedly until the character you want
appears on the screen. Press ENTER.
Repeat step 7 to enter the rest of the SETCLEARSET
characters.
if you would like a blank space in the SELECT_ }_ SET ENTER
END EXIT
label name, you must choose an empl
space from the Iist of characters; otherwise, a dash will appear in
that space.
Repeat steps 1-8 for other channels. You can assign a label to
each channel.
Press EXIT to clear the screen.
To erase channem labems:
1=Select a channel with a label
2. Press MENU, then press ,4 or _ until the OPTION menu appears.
3. Press A or V to highlight CH LABEL.
4. Press _ or _ to display the CH LABEL menu.
SET/CLEAR wilI be highlighted.
5. Press 4 or _ to highlight CLEAR.
6. Press ENTER.
7. Repeat steps 1-6 to erase other channel labels.
Note:
The character wfl!changeas below.
Z _ SPACE _ + _ -
3N42601A[E] P17-28
24
÷
1/24/04, 3:37 PM