FIRMWARE UPDATING
How to update using a USB Mass-storage device
1. Copy the software corresponding to the model to USB Mass-Storage device. (root
directory)
Note: The software should be renamed to upgrade.pkg from the original one before
copying.
Fig.1 USB Mass-storage device
2. Turn TV off, then plug USB Mass-storage device into the USB slot on the TV.
Fig.2 Plugging in USB Mass-storage device into the USB slot on TV
(Viewing from the TV front)
Fig.3 Plugging USB Mass-storage device into the USB slot on the TV (Actual view)
3.
Turn TV on, then a software updating wizard will be displayed. Select "YES" and press
"OK" button on the remote control to start the updating.
To Next Page
Loading...
