Toshiba 32C120U - Automatic Power Saving Features; Automatic Power Down Function

100
Using the TV’s features
Automatic Power Down
3 Press the ( arrow) buttons to select On or Off, and press
EXIT.
Automatic Power Down
The TV can be configured to automatically turn itself off after 4
hours if you do not operate the TV either from the remote control or
the TV control panel.
1 From the Preferences menu, highlight Energy Saving
Settings and press ENTER.
2 Press the ( / arrow) buttons to select Automatic Power
Down.
3 Press the ( / arrow) buttons to select On or Off, and press
EXIT.
The default setting of this feature is Off.
One minute before the TV switches to standby, a warning message
will appear.
When the following features are set, the feature that is set for the
nearest time will function.
❖ Automatic Power Down
❖ Sleep Timer
❖ No signal auto power off (after 15 minutes of no signal)
No Signal Power Down
The TV will automatically turn itself off after 15 minutes when no
signal is detected.
❖ You can change the setting to Off for the following purposes:
❖ Low signal strength of analog channel (no signal detection)
❖ Only Audio L/R is connected to external input to listen to
music through the TV speakers.
To change the no signal power down setting:
1 From the Preferences menu, highlight Energy Saving
Settings and press ENTER.
2 Press the ( / arrow) buttons to select No Signal Power
Down and press ENTER.
NOTE