28
Connecting Your TV
Connecting an HDMI® or DVI device to the HDMI® input
To view the HDMI
®
device video:
Select HDMI 1 or HDMI 2 video input source on the TV. Press the
INPUT button on the remote control. For more information, see
“Selecting the video input source” on page 54.
To connect a DVI device, you will need:
❖ HDMI
®
to DVI adapter cable
For proper operation, the length of an HDMI
®
to DVI adapter
cable should not exceed 9.8 ft (3m). The recommended length
is 6.6 ft (2m).
❖ 3.5mm Stereo to RCA Y-cable
An HDMI
®
to DVI adapter cable transfers video only. Separate
analog audio cables are required (see illustration).
For more information, see “Setting the HDMI® audio mode”
on page 50
(Sample Illustration) Connecting to a DVI device
To ensure that the HDMI
®
or DVI device is reset properly:
❖ When turning on your electronic components, turn on the TV
first, and then the HDMI
®
or DVI device.
❖ When turning off your electronic components, turn off the
HDMI
®
or DVI device first, and then the TV.
VIDEO AUDIO
LR
R
L
OUT
IN
DVI / HDCP
OUT
IN
To Next Page
Loading...
