55
Using the TV’s features
Selecting the video input source
The current signal source displays in the top right corner of the
Input Selection screen.
(Sample Image) Input Selection screen
❖ You can label the video input sources according to the specific
devices you have connected to the TV, see “Labeling the video
input sources” on page 56.
❖ Sources can be “hidden,” see “Labeling the video input sources”
on page 56.
❖ “No video signal” will appear randomly on the screen if no
signal is received in video input mode.
❖ If CEC device is connected to an HDMI
®
input, the
REGZA-LINK
®
icon appears.
If a REGZA-LINK
®
device with HDMI
®
switching capability
(e.g. Audio Receiver) is connected to the HDMI
®
input, press the
INPUT button on the remote control or TV control panel
repeatedly to highlight HDMI 1 or HDMI 2.
If the connected CEC device has any connected devices, a separate
device selection pop-up window appears:
(Sample Illustration) HDMI
®
setting pop-up window
Press the INPUT button repeatedly to highlight the desired input
source, and then press the ENTER button.
To Next Page
Loading...
