Toshiba 32DB833G COMBI Series - Black;White Level; Cinema Mode; Colour Temperature; Static Gamma

33
English
Black/White Level
This function increases the strength of dark
areas of the picture, which improves picture
denition.
In the Picture Settings menu, press ▲
or ▼ to select Black/White Level.
Press ◄ or ► to adjust the level from
Off, Low, Middle to High. The effect
depends on the broadcast and is most
noticeable on dark colours.
Cinema Mode
A movie lm’s picture runs at 24 frames a sec-
ond, whereas movie software such as
Blu-ray Disc™, DVD, etc., that you enjoy
watching on television at home runs at 30
(NTSC) or 25 (PAL) frames a second. To con-
vert this signal to reproduce a smooth motion
and picture quality, select the Cinema Mode.
In the Picture Settings menu, press ▲
or ▼ to select Cinema Mode.
Press ◄ or ► to select On or Off.
Colour Temperature
Colour Temperature increases the ‘warmth’
or “coolness” of a picture by increasing the red
or blue tint.
In the Picture Settings menu, press ▲
or ▼ to select Colour Temperature.
Press ▲ or ▼ to select Colour Tem-
perature and press ◄ or ► to select
Medium, Cool or Warm to suit your
preference.
Colour Temperature
Colour Temperature
Red Level
Blue Level
Green Level
Medium
0
0
0
Press ▲ or ▼ to select Red Level, Blue
Level or Green Level and press ◄ or ►
to adjust the settings as required.
Static Gamma
The static gamma feature allows you to adjust
the levels of black in the picture.
In the Picture Settings menu, press ▲
or ▼ to select Static Gamma.
Press ◄ or ► to select the number of
Static Gamma (-5~+5).
Reset
This feature resets all picture settings to the
factory settings.
In the Picture Settings menu, press ▲ or ▼
to select Reset and press
to reset settings.
NOTE: If any picture settings have not been
changed, Reset is not available.
Active Backlight
When Active Backlight Control is activated,
it will automatically optimise the backlighting
levels for dark scenes.
Press MENU. Press ◄ or ► to select
PICTURE and press to enter the
submenu.
Press ▲ or ▼ to select Active Backlight
Control.
Press ◄ or ► to select On or Off.
3D Colour Management
When 3D Colour management is set to On it
allows the Base Colour Adjustment feature to
become available.
You can adjust the picture colour quality by se-
lecting from 6 base colour adjustments : Red,
Green, Blue, Yellow, Magenta or Cyan.
In the PICTURE menu, press ▲ or ▼ to
select 3D Colour Management.
Press ◄ or ► to select On or Off.
NOTE: When video content with subtitle is
playing back, Cinema mode may not
work correctly.