Toshiba 32E20U - Viewing the System Status

Chapter 5: Setting up your TV
28
To set the Daylight Saving Time status:
1
Press W or X to select Yes or No, highlight Done,
and then press
.
Viewing the system status
To view the system status:
1
Press and open the Setup menu.
2
Highlight Installation and press .
3
A new set of Installation menu icons will appear.
Open the System Status menu, highlight System
Information, and press
.
4
Press WX to scroll through the menu bar to select
the Factory Defaults or Support Information and
view the related information.
To close the screen and return to the
Installation menu:
Highlight DONE and press .
To return to normal viewing:
Press .
Reset Factory Defaults
To reset all settings and channels to their
factory default values:
1
Press and open the Setup menu.
2
Highlight Installation and press . A new set of
Installation menu icons will appear.
3
Open the System Status menu, highlight System
Information, and press
.
4
Press WX to scroll through the menu bar to select
Factory Defaults.
5
Highlight Yes and press .
6
(If PIN code has been set, enter your PIN code.
Press Wor X to select Done and press
.)
The TV will turn off automatically after a few
seconds. After the TV turns off, unplug the TV
power cord and then plug it in again to complete
the reset process.
To cancel the reset:
Select No and press in step 5 above.