Toshiba 32E20U - Using the Advanced Audio Settings Features; Using the Qsound Sound Feature

Chapter 7: Using the TV’s advanced features
53
Using the advanced audio
settings features
Using the QSound
®
sound feature
QSound
®
is the original name for a positional three-
dimensional (3D) sound processing algorithm from
QSound Labs that creates 3D audio effects from
multiple monophonic sources and sums the outputs
to two channels for presentation over regular stereo
speakers.
To adjust the QSound
®
settings:
1
Put the TV in STEREO mode ( “Selecting
stereo/SAP broadcasts” on page 39).
2
Press and open the Sound menu.
3
Highlight Advanced Audio Settings and press .
4
Press T or S to highlight the QSound feature,
and then press W or X to turn the QSound effect
On or Off.
5
To save the new settings, highlight Done and
press
.
To revert to the factory defaults, highlight Reset
and press
.
Note: If the broadcast is monaural, the
QSound effect will not work.