Toshiba 32HL95 - Chapter 5: TV Guide on Screen System Setup

31
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 32/37/HL95 *Web 213 : 276
Configuring the location of your TV
Screen 1: Select the TV location (USA or Canada), and then
press ENTER.
Screen 2: Enter the ZIP code (U.S.A.) or postal code (Canada)
for your location (use the Number buttons on the remote
control for numbers and the yz buttons for letters), and
then press ENTER. Screen 3 appears.
Screen 3: Do you have Cable service connected?
If you select Yes (and press ENTER), screen 4 appears.
If you select No (and press ENTER), screen 12 appears.
Screen 4: Do you have a Cable box connected?
If you select Yes (and press ENTER), screen 5 appears.
If you select No (and press ENTER), screen 13 appears.
The TV Guide On Screen
™
system in your TV is a free
interactive program guide that uses the information you enter
during the following setup process to provide you with a
channel lineup and program listings for your area. The listings
are automatically updated several times a day.
Note:
You must first set up your TV according to the applicable
connection instructions in Chapter 2.
To set up the TV Guide On Screen
™
system:
1. Press MENU and open the Setup menu.
2. Highlight Installation and press ENTER.
Navigate
Select
Back Exit
CH RTN EXIT
Installation
Sleep Timer
On/Off Timer
PC Settings
No
Auto
2
PC Audio
HDMI Audio
Gray Level
Setup
3. A new set of Installation
menu icons appears
on-screen (see
illustration at right).
Open the TV Guide
On Screen
™
Setup
menu, highlight Start,
and press ENTER.
4. The following screen opens. Highlight “Set up TV Guide
On Screen
™
now” and press ENTER to continue.
5. The following screen opens. Press ENTER to continue.
TV Guide On Screen
™
system setup
5
Navigate
Select
Back Exit
CH RTN EXIT
Start
TV Guide On Screen Setup
Setting up the TV Guide On Screen™ system
#01E_031-034_3237HL95 5/20/05, 2:19 AM31
Black