Toshiba 32HL95 - Viewing the System Status

41
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 32/37/HL95 *Web 213 : 276
Chapter 6: Setting up your TV
To check the system status:
1. Press MENU and open the Setup menu.
2. Highlight Installation and press ENTER. (A new set of
Installation menu icons will appear on-screen, as shown
below right).
Navigate
Select
Back Exit
CH RTN EXIT
Installation
Sleep Timer
On/Off Timer
PC Settings
No
Auto
2
PC Audio
HDMI Audio
Gray Level
Setup
Navigate
Select
Back Exit
CH RTN EXIT
System Infomation
System Status
3. Open the System Status menu, highlight System
Information, and then press ENTER.
4. Use x • to scroll through the menu bar to check the
Product Information and Software Version.
System Information
O K
Brand:
Model:
Toshiba
32HL95
Product Information
System Information
O K
0.4.0
Mar 29 2005 - 10:44:39
FW:0.16
Sub:46
Software Version
To close the screen and return to the Installation menu:
Highlight OK and press ENTER.
To return to normal viewing:
Press EXIT.
Restore Factory Defaults
To restore all settings and channels to their factory default
values:
1. Follow steps 1–3 above.
2. Use x • to scroll through the menu bar to select Factory
Defaults.
3. Enter your PIN code (or 0000 if no PIN code has been set).
To cancel the reset:
Highlight No and press ENTER.
To continue the reset process:
Highlight Yes and press ENTER. The TV will turn off
automatically after a few seconds. After the TV turns off,
unplug the TV power cord and then plug it in again to
complete the restore process.
Viewing the system status
#01E_038-041_3237HL95 5/20/05, 2:26 AM41
Black