Chapter 7: Using the TV Guide On Screen™ interactive program guide
54
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 32/37/HL95 *Web 213 : 276
TV Guide On Screen™ Services (continued)
SETUP screen
After you complete the initial TV Guide On Screen
™
setup (as
described in Chapter 5), you can change the following settings:
• Change system settings
• Change channel display
• Change default options
Highlight a choice, press ENTER, and follow the on-screen
instructions.
With SETUP highlighted in the Service Bar, press INFO to
display a help screen. Press INFO again to close the screen.
Change system settings
This option appears only after you have completed the initial TV
Guide On Screen
™
setup process (as described in Chapter 5).
1. From the SETUP screen, highlight CHANGE SYSTEM
SETTINGS and press ENTER.
2. Press ENTER again
to display the
Confirming Your
Settings screen.
3. Highlight one of the
options, press
ENTER, and follow
the on-screen
instructions.
Change channel display
This option allows you to edit channel information that appears
in LISTINGS, including the following:
• Reorder the position the channels appear in LISTINGS.
• Change the “tune channel” number.
Note: The “tune channel” is the channel on which you receive
astation. For example, two viewers in the same zip code may
receive the same station on different channel numbers,
depending on whether they have Cable service or are using a
cable box.
• Switch a channel to one of the following settings:
– On (channel is always displayed in LISTINGS)
– Off (channel is never displayed in LISTINGS)
– Auto-Hide (channel is displayed in LISTINGS only
when program information is available)
1. From the SETUP screen, highlight CHANGE CHANNEL
DISPLAY and press ENTER.
2. Press ENTER again to display the Grid Options panel
menu.
3. Highlight one of the options, press ENTER, and follow the
on-screen instructions.
#01E_052-055_3237HL95 5/20/05, 2:33 AM54
Black
To Next Page
Loading...
