64
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 32/37/HL95 *Web 213 : 276
Chapter 8: Using the TV’s features
Selecting the cinema mode
(480i signals only)
When you view a DVD (480i signal; 3:2 pulldown processed)
from a DVD player connected to the VIDEO 1, VIDEO 2,
ColorStream HD1/HD2 (component video) or HDMI inputs
on the TV, smoother motion can be obtained by setting the
Cinema Mode to Film.
To set the Cinema Mode to Film:
1. Press MENU and open the Video menu.
2. Highlight Theater Settings and press ENTER.
Picture Settings
Advanced Picture Settings
Theater Settings
Video
Navigate
Select
Back Exit
CH RTN
EXIT
3. In the Cinema Mode field, select Film.
Done
Theater Settings
Picture Size Natural
Picture Scroll -1
Cinema Mode
Auto Aspect Ratio On
Reset
Film
4. To save the new settings, highlight Done and press
ENTER. To revert back to the factory defaults, highlight
Reset and press ENTER.
To set the Cinema Mode to Video:
Select Video in step 3 above.
Using the FREEZE feature
1. When viewing the TV, press FREEZE to make the picture a
still picture.
2. To return to the moving picture, either press FREEZE
again, press EXIT, change the channel, or change the input.
Note: If the TV is left in FREEZE mode, after 15 minutes it will
automatically release the FREEZE mode and return to the
moving picture.
Moving picture Still picture
Using the FREEZE function for any purpose other than your
private viewing may be prohibited under the Copyright Laws of
the United States and other countries, and may subject you to
civil and criminal liability.
FREEZE
#01E_056-064_3237HL95 5/20/05, 2:35 AM64
Black
To Next Page
Loading...
