62
English
Q
Why are the colours wrong when an
NTSC source is played?
A
Connect the NTSC source via a SCART
cable and play. Select Manual setting
from the SETUP menu and set the Col-
our System to Auto.
Manual setting
EXT 1 A
Colour system: Auto
Select Change
OK
Save
RETURN
Back
Q
What can be done if the user-de¿ ned
password has been forgotten?
A
Use the universal password 1276, then
change to a new number of your choice.
Q
Why don’t the devices connected via
HDMI operate properly?
A
Make sure to use cables with the HDMI
logo (
®
). Some early HDMI
equipment may not work properly with
the latest HDMI TV products, due to
adoption of new standards.
Q
Why is the Media Player/DVD picture in
black and white?
A
Check the correct input has been cho-
sen: S-VIDEO or AV.
Q
Why did TV turn off by itself?
A
After roughly 15 minutes without any
input video signal at TV mode, the TV
will turn off to reduce power.
To Next Page
Loading...
