30
PC connection
As PCs are sometimes supplied with a ‘conventional’ CRT monitor, you may need to adjust the display
settings of your PC’s graphics card, otherwise the pictures may not appear correctly. Switch on your PC (still
with your original monitor) - select ‘1360 x 768’ for the screen resolution, and select 60 Hz for the on-screen
refresh rate. Switch off your PC, then connect it to your LCD TV while both items are still switched off.
VGA cable
(not supplied)
Use a PC-VGA cable (not supplied) to connect the LCD-Monitor
to your PC. Make the connections carefully so as not to break or
bend the contacts inside the plug.
Select PC input
Press INPUT SELECT and
press
or to select PC,
then press ENTER. PC appears
on the TV screen.
Notes:
If there is no video signal from the computer when the unit is
in PC mode, ‘NO SIGNAL’ will appear on the TV screen.
See next page for PC mode menu.
Monitor Display modes
MODE Resolution Refresh rate
VGA 640x480 60Hz
VGA 720x400 70Hz
SVGA 800x600 60Hz
XGA 1024x768 60Hz
WXGA 1280x720 60Hz
WXGA 1280x768 60Hz
WXGA 1360x768 60Hz
(according to Graphic card)
•
•
Notes:
Digital PC-connection via HDMI input
is not supported.
If you try to connect your PC digitally
anyway, the TV-operation might
freeze. TV will stop to respond
properly on usercommands.
Countermeasure: Switch-off your
TV and disconnect from the 230V-
power-supply.
Disconnect the digital PC-connection.
Now you may retry operating your TV.
If a digital PC-connection does show
a picture, proper working is not
guaranteed. Digital PC-connection is
not granted for this TV.
•
•
Audio cable
(not supplied)
PC
TV
(Left side view)
to AUDIO 1
input
32L0141B_Eng.indd 3032L0141B_Eng.indd 30 6/7/2007 9:21:21 AM6/7/2007 9:21:21 AM
To Next Page
Loading...
