English - 45 -
(**) Limited Models Only
equipment. Wait for 1 to 2 hours in Stand-by to dry
the equipment.
Disc does not play
No disc in the machine. Place a disc into the loader.
Disc incorrectly loaded.
Note: Ensure that the DVD disc is in the tray with the label
facing forward.
Wrong type of disc. The machine cannot play CD-
ROMS, etc. The region code of the DVD must match
the player.
Wrong OSD language
Select the language in the set-up menu.
The language for the sound or subtitles on a DVD
cannot be changed.
Multilingual sound and/or subtitles not recorded on
the DVD.
Try to change the sound or subtitles using DVD’s title
menu. Some DVD’s do not allow the user to change
these settings without using the disc’s menu
These functions are not available on the DVD.
No picture
Make sure you have pressed the correct buttons on
the remote control. Try once more.
No sound
Check if volume is set to an audible level.
Distorted sound
Check that the appropriate listening mode setting
is correct.
If nothing works
If you have tried the above solutions and none seem
If this does not work, contact your supplier or TV-DVD
repair technician. Never attempt to repair a defective
TV-DVD yourself.
To Next Page
Loading...
