Toshiba 34HFX84 - Connecting Two VCRs; Connecting a Camcorder

- 13 -
Remote Control
POWER turns the TV on and off
SLEEP allows access to the automatic TV shut-off function
LIGHT The first press of the LIGHT button lights the keypad and turns
on the Illumination mode. With the Illumination mode on,
pressing any other key lights the keypad for 5 seconds (10 seconds
if you’re in programming mode).
Subsequent presses of the LIGHT button toggle between turning
the Illumination mode on and off.
Channel Numbers (0-9, 100) allow direct access to channels
MODE cycles through the six device modes: TV, CABLE/SAT, VCR,
DVD, AUDIO1, and AUDIO2. The mode indicator light will
remain lit for a few seconds.
PIC SIZE cycles through the five pictures sizes: Natural, Theater Wide 1,
2, 3, and Full
FAVORITE allows access to the favorite channel search function
MENU allows access to on-screen programming menus
ENTER sets programming menu information
yz x • select or adjust programming menus
FAV yz cycles through favorite channels
CH yz cycles through programmed channels
VOL yz adjusts the volume level
EXIT exits the programming menus
INPUT selects the video input source
MUTE mutes the sound
RECALL displays on-screen information
CH RTN returns to the last viewed channels
POP CH yz selects the POP (picture-out-picture) channel
SPLIT turns the POP feature on and off
CH SCAN allows access to the programmed channel search function
FREEZE freezes the picture. Press again to restore the picture.
SWAP switches the main and POP pictures
POP DIRECT CH allows direct access to POP channels
SOURCE selects the POP picture source
Note:
The error message “Not Available” will appear
if you press a key for a function that is not
available.
All manuals and user guides at all-guides.com