Toshiba 36HF72 - Page 20

Changing the on-screen display language
Choose from three different languages (English, French and Spanish)
for the on-screen display of adjustment menus and messages.
To select a language:
1. Press MENU, and then press • or • until the SET UP menu
appears.
2. Press • or • to highlight LANGUAGE.
®@@®@@
SET UP
ANT1/2 ANT1
TV/CABLE CABLE
CH PROGRAM
ADD/ERASE AD_
TILT CORRECTION
WICK CONNECT GUIDE
3. Press • or • to highlight your desired language.
Selecting the antenna input
You can connect to two different antenna input sources (ANT 1 or
ANT 2).
To select the antenna input using the TV/VIDEO button:
1. Press TV/VIDEO on the remote control or the TV (see
illustrations below). The current signal source displays in purple.
2. Continue pressing the TV/VIDEO button to select ANT 1 or
ANT 2.
TV front panel
MENU • II_T,i
LIGHT RECALL PC ER
,,,_ CvAc_LE,,,_ CvA_L E _TV_.... TV..... T .....
® ®
® ® ®
TV/VIDEO
SOURCE SELECTION
0: ANT 1
1: VIDEO
2: VIDEO _
3: VIDEO 3
4: ColorStream HD1
5: ColorStream HD2
6: ANT 2
SOURCE SELECTION
ANT 1
VIDEO 1
VIDEO 2
VIDEO 3
CoIorStream HDt
CoIorStream HD2
ANT 2
PressingTV/VIDEOonthe remote
controldis_ thecurrentsignal
source(pressTV/VIDEOagainor
0-6 tochan2_
Pressing TV/VIDEO on the TV
chang#_?,the current signal source
To select the antenna input using the menu system:
1. Press MENU, and then press • or • to highlight the SET UP
menu.
2. Press • or • to highlight ANT 1/2.
@@@®@@
SET UP
LANGUAGE ENGLISH
CH PROGRAM
ADD/ERASE AD_
TILT CORRECTION
WICK CONNECT GUIDE
3. Press • or • to highlight either ANT 1 or ANT 2, depending on
the antenna terminal you wish to use.
TV front panel
t f
( DEMo MENU TV/VIDEO VOLUME CHANNEL (
TV/VIDEO
20