3. TV front panel
Press • or • to highlight ADD/ERASE.
®@®®@®
SET UP
LANGUAGE ENGLISH
CLOCK SET 00:00
ANT1/2 ANT1
TV/CABLE CABLE
P
TILT CORRECTION 0
QUICK CONNECT GUIDE
4. Press • or • to select ADD or ERASE, depending on the
function you want to perform.
5. Repeat steps 1_ for other channels you want to add or erase.
Using the Quick Connect Guide
Tile Quick Connect Guide automatically starts the first time tile TV
is turned on. This feature provides on-screen instructions to guide you
through initial setup of your TV.
You can change the current settings any time.
1. Press MENU, and then press • or • until the SET UP menu
appears.
2. Press • or • to highlight "QUICK CONNECT GUIDE."
®@®®®@
SET UP
LANGUAGE ENGLISH
CLOCK SET 00:00
ANT1/2 ANT1
TV/CABLE CABLE
CH PROGRAM
ADD/ERASE AD_
T I LT CORRECTI ON
3. Press • or • to enter the Quick Connect Guide mode.
Advance the setup according to the guide displayed on-screen.
• Press • or • to make a selection.
• Press MENU to continue to the next screen.
The Quick Connect Guide will guide you through the following
items.
MENU • I_TA
LIGHT RECALL POWER
;: ® @@
CABLE MUTE TVNIDEO TIMER
® ® ®
U
Note:
Tostop the Quick Connect Guide, press EXIT
or tum off the TIZ
Yes
No
L/
4,
4,
I
22
To Next Page
Loading...
