-
13
-
ADJUSTMENT PROCEDURE
ADJUSTING ITEMS
AND POINTS
No.
Circuit Adjustment (Procedure Manual for Deflection Adjustment)
1 Focus Adjustment (1)
Static (main): T461
Dynamic : T461
Conditions : E-12ch
Screen Size: Wide
Presentation Mode: Dynamic
Adjustment Procedure:
1) Turn the static VR knob to the “MIN.” position and the dynamic VR knob to the
“MAX.” position.
2) Adjust the static VR knob to the “MAX.” direction to optimize the peripheral
focus.
3) Adjust the dynamic VR knob to “MIN.” direction to optimize the center focus.
4) Adjust the static VR knob and the dynamic VR knob alternately to optimize the
full screen focus.
Refer to the diagram below for the location of the static VR knob and dynamic VR
knob.
DYNAMIC VR knob
STATIC VR knob
SCREEN knob
To Next Page
Loading...
