Toshiba 36JW9UA - Page 21

- 21 -
PROGRAMMING CHANNEL MEMORY
To preset channels (Auto tuning)/To preset channels (Manual tuning)
• First, use the Auto tuning feature to preset all the active channels in your area automatically. Then,
arrange the preset channels with the Manual tuning feature so that you can tune in only desired
channels.
• Use the Channel search operation if desired channels cannot be preset with the Auto tuning or if
you would like to preset channels to specific position numbers one by one.
1
2
3
4
Auto tuning
Press the MENU button, then
press the
< or > button to
display the SET UP menu.
Press the
or button to
select Auto tuning.
Press and hold the OK button
for several seconds to start
the automatic search.
The search will begin for all
available stations.
Bullet will move along the line as the search progresses.
DO NOT PRESS ANY BUTTONS WHILE THE AUTOMATIC
SEARCH IS IN PROGRESS.
If you make a mistake, simply repeat steps 1-2 to start
again from the beginning.
When the automatic search is complete, the TV will
automatically return to the first program position.
Press the CH8 or CH9 button to view the programmed
position.
MENU
Back Watch TV
EXIT
SET UP
Manual tuning
Auto tuning
Language
Program sorting
OK
OK
Picture position
OK
English
Searching
Pos: 2
Auto tuning
CancelEXIT
Manual tuning
Press the MENU button, then
press the
< or > button to
display the SET UP menu.
Press the
or button to
select Manual tuning.
Press the OK button to display
the Manual tuning menu.
Press the
or button to
select the program position
you want to arrange.
Press the OK button to display
the breakdown menu.
Press the
< or > button to
select an item, then press
the
or button to select
the item as shown below.
MENU
Back Watch TV
EXIT
SET UP
Manual tuning
Auto tuning
Language
Program sorting
OK
OK
OK
English
Picture position
MENU
Back Watch TV
EXIT
Manual tuning
Select
1 B/G
2 B/G
3 B/G
4 B/G
5 B/G
6 B/G
Prog. Sys.
Label
1
2
3
MENU
Back Watch TV
EXIT
Store
Manual tuning
Program
B/G
A
1