EasyManua.ls Logo

Toshiba 40BV700F - Auto Tuning

Toshiba 40BV700F
41 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English - 12 -
and analogue TV broadcasts:
Note: You can press MENU button to cancel.
After all the available stations are stored, Channel
List will be displayed on the screen. If you like the
sort channels, according to the LCN, please select
Yes and than press OK.
Press OK button to quit channel list and watch TV.
Note :
Do not turn off the TV while initializing rst time
installation.
Auto Tuning
As new services are broadcast, it will be necessary to
re-tune the television in order to view them.
Auto Tuning will completely re-tune the television and can
be used to update the channel list. It is recommended
that Auto Tuning is run periodically to ensure that all new
services are added. All current channels and settings, i.e.
locked channels, will be lost.
Press MENU button on the remote control and
select Installation by using Left or Right button.
Press OK button and the following menu screen
will be displayed.
Select Automatic Channel Scan by using Up or
Down button and press OK button. Automatic Channel
Scan options will be displayed. You can select Digital
Aerial, Analog or Digital Aerial-Analogue tuning using
Up or Down and OK buttons.
Auto Channel Scan Menu Operation
Digital Aerial: Searches and stores aerial DVB stations.
Digital Cable: Searches and stores cable DVB stations.(*)
Analogue: Searches and stores analogue stations.
Digital Aerial & Analogue: Searches and stores both
analogue and aerial DVB stations.
Digital Cable & Analogue: Searches and stores both
analogue and cable DVB stations. (*)
(*) Only for 40BV700G model
Whenever you select an automatic search type and
press OK button, a con rmation screen will appear
on the screen. To start installation process, select
Yes, to cancel select No by using Left or Right
and OK button.
After auto channel scan type is set and selected
and con rmed, installation process will start and
progress bar will move along. Press MENU button
to cancel process. In such a case, located channels
are not stored. The television will start to search for
all available stations. You must allow the television
to complete the search.
Auto TuningInitial Installation - continued
TOSHIBA_MB61_[GB]_3910UK_IDTV_(IB_INTERNET).indd 12TOSHIBA_MB61_[GB]_3910UK_IDTV_(IB_INTERNET).indd 12 26.10.2010 11:00:0826.10.2010 11:00:08

Table of Contents

Related product manuals