UsingtheTV'sfeatures 105
Di_pko,ing TV status infom_ation
o*,, Digital signal strength indicator (bar graph in lower right
corner of box; for ATSC signals only)
o*,o Stereo, Mono, or SAP audio status (when in HDMI <'_input
mode, Dolby _'_Digital, or PCM)
o*,oVideo resolution
o*,oAspect ratio of incoming video signal (4:3 or 16:9)
o*,oV-Chip rating status
o*,oGameTimer <'_(if set)
(Sample Illustration) Recall banner
To close the Recall screen, press the RECALL button again.
To display TV status information using INFO:
o*,oPress the INFO button.
The following additional information will display for oft"air digital
channels, if applicable:
o*,oTitle
o*,oDuration
o*,oDetailed description
(Sample Illustration) In/b banner
To close the INFO screen, press the INFO button again.
NOTE Thelocationofthebannercanbemovedto thetop orbottomofthe
screenbypressingA or T whiletheRECALLor INFOdisplayis
on-screen.
To Next Page
Loading...
