6 ConnectingYour"IV
(_mnecting an HDMI® or DVI device to the HDMI® input
o:. If your DVD player does not have component video,
connect a standard A/V cable to the AUDIO/VIDEO
terminal. If your DVD player has HDMI _ video, see
"Connecting an HDMI® or DVI device to the HDMI®
input" on page 26.
To view antenna or Cable channels:
Select the ANT/CABLE video input source on the TV.*
To view the DVD player:
Turn On the DVD player. Select the ColorStream HD video input
source on the TV.*
To view satellite programs using the component video
connections:
Turn On tile satellite receiver. Select tile ColorStream HD video
input source on tile TV.*
To view the VCR or view and record antenna channels:
Turn On tile VCR. Tune tile VCR to tile channel you want to watch.
Select tile VIDEO video input source on tile TV.*
To record a TV program while watching a DVD:
Turn On tile VCR. Tune tile VCR to tile channel to record. Select
tile ColorStream HD video input source on tile TV* to view tile
DVD.
*To select the video input source, press the INPUT button on the
remote control, see "Selecting the video input source" on page 54.
NOTE Theunauthorizedrecording,use,distribution,or revisionof
televisionprograms,videotapes,DVDs,andothermaterialsis
prohibitedundertheCopyrightLawsof theUnitedStatesandother
countries,andmaysubjectyouto civil andcriminalliability.
ConnectinganHDIVII®or DVIdevicetothe HDIVII® input
Tile HDMF _input on your TV receives digital audio and
uncompressed digital video from an HDMF _source device, or
uncompressed digital video from a DVI (Digital Visual Interface)
source device.
This input is designed to accept HDCP (High-Bandwidth
Digital-Content Protection) program material in digital form from
EIA/CEA-861-D- compliant consumer electronic devices (such as
a set-top box or DVD player with HDMI <'_or DVI output).
To Next Page
Loading...
