ConnectingYourTV _(_
REGZA-LINK® connection
REGZA-LINK®connection
You can control the basic functions of connected audio/video
devices using the TV's remote control if you connect a
REGZA-LINW ')compatible audio receiver or playback device. For
an explanation of setup and operations, see "REGZA-LINK®
playback device (DVD player, etc.) control" on page 101.
TV back panel
Playbackdevice
(REGZA-L[NK_ DVDplayer, etc.)
(Sample Illustration) HDMf _REGZA-LINI( _ connections
To connect an HDMF ° device, you will need one HDMI ®cable
(type A connector) per HDMI ®device (see "Overview of cable
types" on page 21).
NOTE .:. Ifseveraldevicesareconnected,REGZA-LINK®featuremaynot
operateproperly.
•:. Forproperoperation,itis recommendedthatyou useanHDMI®
cablewiththeHDMI®Logo(H_mw).
Before controlling the device(s):
o:o After completing the above connections, configure the
REGZA-LINK ®Setup menu with the desired settings, see
"REGZA-LINK® input source selection" on page 103.
o:o The connected devices must also be set. For details, see the
operation manual for each device.
o:o The REGZA-LINK ®feature uses the CEC technology as
regulated by the HDMI ®standard.
To Next Page
Loading...
