Chapter5
SettingupyourIV
InitialSetup
When you first turn on or reset tile TV, tile Initial Setup window
will appear.
1 In the Menu Language field, press tile (41 _ arrow) buttons to
select your preferred language.
2 Press tile (A/Y arrow) buttons to select Time Zone Setup.
Then set your desired time zone, using tile (41_' arrow)
buttons and press tile ENTER button.
Tile Location settings window appears.
3 For normal home use, press tile (41_ arrow) buttons to select
Home, and then press tile ENTER button.
Tile ANT/CABLE In setup window appears.
4 Press tile (,_1 _ arrow) buttons to select tile input source
(Cable or Antenna), and then press ENTER.
5 Press tile ENTER button to select Start Scan and continue
with tile Auto Tuning.
You can stop tile Initial Setup by pressing tile EXIT button.
However if you do not finish tile entire Initial Setup process and
press tile POWER button before completing all tile steps, tile Initial
Setup window will appear every time you turn on tile TV.
44
To Next Page
Loading...
