Toshiba 40E220U - Storing channels in memory (optional)

6 SettingupyourTV
Storing clTan_ls in men_)O,(optio_d)
A new set of Installation menu icons appears.
3 Open tile Terrestrial menu, highlight Input Configuration,
and then press tile ENTER button.
(Sample image) Terrestrial menu - input Co,_figuration selection
4 Highlight ANT/CABLE In and press tile (4/_ arrow) buttons
to select tile input source (Cable or Antenna).
(Sample Image) Input Co,_figuration screen
5 To save your new settings, highlight Done, and then press the
ENTER button. To revert to your original settings, highlight
Cancel, and then press tile ENTER button.
Storingchannelsinmemory(optional)
To make sure your TV stops only on tile channels you want when
you press the CH (A/Y arrow) buttons on the remote control or the
control panel, store those channels in the TV's memory.
AutoTuning
You can set up tile TV to detect all active channels in your area and
store them in its memory.