Toshiba 40E220U - Page 49

SettingupyourTV 49
Setting channel skip
2 Press the (A/Y arrow) buttons to select Channel Options, and
then press the ENTER button.
The list of channels appears.
(Sample Illustration) List qf channels
Press the (A/Y arrow) buttons to select a channel position to
be skipped, and then press the ENTER button.
A check will appear in the box. To remove the check, press tile
ENTER button again.
To add a channel to the channel memory:
o:o Highlight the checked box next to the channel number you
wish to add, and then press the ENTER button to remove the
check.
NOTE Youcanalsoblockspecificchannelssothattheycannotbetuned
untilyouunlockthem.Forinformation,see"Lockingchannels"on
page87
To manually add digital sub-channels on a physical channel:
o*,o Use the Channel Number buttons and the Dash (1!)0) on the
remote control to enter the channel number (for example,
56-1).
If the channel is found, the number will be added to the list and
the box will be unchecked. If the channel is not found, a
message appears.
NOTE SkippedchannelscannotbeselectedwiththeOHUp/Downbuttons;
however,theycanbeaccessedusingthenumberbuttonsonthe
remotecontrol.
If an encrypted channel is accidentally added to the channel list
while programming channels, you can remove the unwanted
encrypted (non-viewable) channel while you are channel surfing.