SettingupyourTV 53
Vi_>lving the s_'stem st_ttus
ResettingFactoryDefaults
To reset all settings and channels to their factory default values:
1 Press the MENU button to open the Setup menu.
2 Highlight Installation, and then press the ENTER button.
A new set of Installation menu icons appears.
3 Open the System Status menu, highlight System
Information, and then press the ENTER button.
4 Press the (@/_ arrow) buttons to scroll through the menu bar
to select Factory Defaults.
5 Highlight Yes, and then press the ENTER button.
6 If a PIN code has been set, enter your PIN code.
7 Press the (41/_ arrow) buttons to select Done, and then press
the ENTER button.
A warning message appears.
8 Select Yes, and then press the ENTER button.
The TV turns off automatically after a few seconds.
9 After the TV turns off, unplug the TV power cord and then
plug it in again to complete the reset process.
To cancel the reset process, select No, and press the ENTER button
in step 5 above.
To Next Page
Loading...
