8 UsingtheTV'sfeatures
Tuning channels using the Channel B_vwser TM
Input labeling example:
The screen below left shows the default Input Selection screen
(with none of the inputs labeled as a specific device). The screen
below (right) is an example of how you can label the inputs if you
connected a VCR to ColorStream ®HD, a video recorder to
HDMI 1, and a DVD player to HDMI 2.
Noinputslabeled All inputslabeled
(Sample Image) Input selection screens
To clear the input labels:
1 Press the MENU button and open the Preferences menu.
2 Highlight Input Labeling, and then press the ENTER button.
3 Highlight Reset, and then press the ENTER button.
TuningchannelsusingtheChannelBrowserTM
The Channel Browser TM provides an easy navigation interface for
all your channels and inputs. This feature allows you to:
o*.o View and select entries from all of your inputs.
o*.o Keep a list of your favorite channels, see "Favorites browser"
on page 59.
o*.o Quickly surf and tune your recently viewed channels/inputs
from the Channel Browser TM History List.
o*.o Surf via Browse mode (to immediately tune channels as you
highlight them in the Channel Browser TM) or Select mode (to
surf over channels in the Channel Browser TM before you select
one to tune).
o*.o Quickly change inputs from the Inputs List.
o*.o Quickly select REGZA-LINK _9devices from the
REGZA-LINK _9List.
To Next Page
Loading...
