0 UsingtheTV'sfeatures
Tuning channels using the Channel Blvwser TM
5 Press the (y arrow) button to highlight Inputs List, and then
press the (4/_ arrow) buttons to select On or Off.
6 Press the (y arrow) button to highlight Favorites List, and
then press the (4/_ arrow) buttons to select On or Off.
7 Press the (y arrow) button to highlight REGZA-LINK List,
and then press the (4/_ arrow) buttons to select On or Off.
NOVE REGZA-LINK®Listisautomaticallygrayedoutandsetto Offwhen
EnableREGZA-LINK®isswitchedtoOff.See"UsingREGZA-LINK®"
onpage101.
8 To save the new entries, highlight Done, and then press the
ENTER button.
To return to factory defaults, highlight Reset, and then press
the ENTER button.
To open the Channel BrowserTM:
Press the BACK CB or NEXT CB arrow buttons on the
remote control.
Press the BACK CB arrow button to surf backward through the
previously tuned channels in the History list, the channels in
the ANT/CABLE channel list, the inputs in the Inputs list, the
favorite channels/inputs in the Favorites list, or the
REGZA-LINW _devices in the REGZA-LINW _ List.
Press the NEXT CB arrow button to surf forward through the
channel History, the ANT/CABLE channel list, the Inputs list,
the favorite channels/inputs in the Favorites list, or the
REGZA-LINW _List.
ElementsoftheChannelBrowserTM
2 3
i
1TM
4
J
(Sample Illustration) Channel Browse/r__ elements
1 Current list (History, ANT/CABLE, Inputs, Favorites, or
REGZA-LINK+_).
2 Channel or input type.
To Next Page
Loading...
