4 UsingtheW's features
Selecting thepicture size
The TV will return to the memorized channel onetime only. Once
you press the CH RTN button and then change channels again, the
CH RTN memory will be cleared and the button will function as
Channel Return, by switching back and forth between the last two
channels that are tuned.This feature also works for external inputs.
Selectingthepicturesize
You can view many program formats in several picture sizes--
Native, 4:3, Full, TheaterWide 1, TheaterWide 2, TheaterWide 3,
Normal, and Dot by Dot.
NOTE Thepicturesizeillustrationsareexamplesonly.Theformatofthe
image(in anyofthepicturesizes)dependsontheformatofthe
signalyouarecurrentlywatching.Selectthepicturesizethat
displaysthecurrentprogramin thewaythatlooksbestto you.
You can save separate picture size preferences for each input on
your TV.
To select the picture size:
1 Press the PIC SIZE button on the remote.
With the Picture Size menu displayed, do one of the following:
o**o Repeatedly press the PIC SIZE button to cycle through
the picture sizes.
o**o Press the corresponding number button (0-5) while the
Picture Size menu is displayed.
°_o Press the (A/Y arrow) buttons while the Picture Size
menu is displayed.
2
NOTE Usingthesefunctionsto changethepicturesize(i.e.,changingthe
height/widthratio)foranypurposeotherthanyourprivateviewing
maybeprohibitedundertheCopyrightLawsofthe UnitedStatesand
othercountries,andmaysubjectyouto civil andcriminalliability.
To select the picture size using the menus:
1 Select Picture Size in the Theater Settings menu.
2 Press the (4/!1_ arrow) buttons to select the desired picture size
setting.
3 Highlight Done, and then press the ENTER button.
To Next Page
Loading...
