2 UsingtheTV'sfeatures
ALijus_ng tiTepicture
3 Press the (A/Y arrow) buttons to select the picture mode you
prefer, and then press the ENTER button.
(Sanq)le Image) Mode selections semen
Adjustingthepicturequality
You can adjust the picture quality (Contrast, Backlight,
DynaLight TM, Brightness, Color, Tint, and Sharpness.) to your
personal preferences.
Selection Pressing ( _) Pressing ( _,)
Contrast lower higher
Backlight* darker lighter
UynaLightTM** On/Off On/Off
Brightness darker lighter
Color paler deeper
Tint reddish greenish
Sharpness softer sharper
* Backlight: adjusts the brightness of the entire screen. When in video mode
and no signal is input, this selection is automatically set to O. (Settings are
stored in memory.)
**DynaLightTM: automatically strengthens the black coloring of dark areas
in the video according to the level of darkness.
To adjust the picture quality:
1 Press the MENU button and open the Picture menu.
2 Highlight Picture Settings, and then press the ENTER button.
3 Press the (&/y arrow) buttons to select the picture quality you
wish to adjust (Contrast, Backlight, DynaLight TM, Brightness,
Color, Tint, or Sharpness), and then press the (4/_ arrow)
buttons to adjust the setting.
To Next Page
Loading...
