Toshiba 40E220U - Ccselector

Usingthe TV's features "7_
Using closed captions
4 To save the new settings, highlight Done, and then press the
ENTER button.
To revert to the factory defaults, highlight Reset, and then
press the ENTER button.
Mode. Description
Captionsize Auto,Small,Standard,Large
Captiontexttype Auto,Default,Mono(withSerif),Prop.(withSerif),Mono
(withoutSerif),Prop.(withoutSerif),Casual,Cursive,Small
Capitals
Captiontextedge Auto,None,Raised,Depressed,Uniform,LeftDropShadow,
RightDropshadow
Captiontextcolor Auto,Black,White,Red,Green,Blue,Yellow,Magenta,Cyan
Textforegroundopacity Auto,Transparent,Translucent,Flashing,Solid
Backgroundcolor Auto,Black,White,Red,Green,Blue,Yellow,Magenta,Cyan
Textbackgroundopacity Auto,Transparent,Translucent,Flashing,Solid
Captiontextedgecolor Auto,Black,White,Red,Green,Blue,Yellow,Magenta,Cyan
CCSelector
You can use the CC Selector to temporarily override the default
analog caption mode (set in Base CC Mode) for a particular
channel. However, once you change to any other channel, the
closed caption setting will automatically change back to the current
Base CC Mode setting.
You can also use the CC Selector to select digital closed caption
services, if available. When such services are not available, the CC
Selector presents a default list of services. If the selected service is
not available, the next best service will be used.
To select closed captions:
1 Press the MENU button and open the Preferences menu.
2 Highlight CC Selector, and then press the ENTER button.
3 Press the (A/V arrow) buttons to select Closed Caption, and
then press the (,_/_ arrow) buttons to select the desired
service.