0 UsingtheW's features
Using the I_)cks' menu
UsingtheDolby®DigitalDynamicRangeControlfeature
You can further compress Dolby Digital and Dolby Digital Plus
dynamic range, allowing you to switch from digital to analog
broadcasts at the same dynamic range.
To use the Dolby Digital Dynamic Range Control:
1 Press the MENU button and open the Sound menu.
2 Highlight Audio Setup, and then press the ENTER button.
3 In the Dolby Digital Dynamic Range Control field, select
either Compressed or Standard. When Standard is selected,
the audio outputs with minimal compression.
4 To save the new settings, highlight Done, and then press the
ENTER button.
To reset the settings to the factory defaults, highlight Reset,
and then press the ENTER button.
NOTE 4. ThisfeatureisavailablewhentheTVis tunedto adigitalRF
channelwiththeUolbyDigitalsignal.
¢ TheDolbyDigitalDynamicRangeControlwill functionin
relationtoOpticalOutputFormat(PCMmode).
UsingtheLocksmenu
Tile Locks menu includes tile Enable Rating Blocking, Edit Rating
Limits, Input Lock, Panel Lock, GameTimer _'_and New PIN Code
features. You can use these features after entering the correct PIN
code.
EnteringthePINcode
l Press tile MENU button and highlight tile Locks menu icon.
(Sample Image) LocLs menu screen (fbr USA region)
To Next Page
Loading...
