Usingthe TV's features _7
Using the input lockJeature
To temporarily unlock the program:
1 Press the MUTE button.
2 Enter your four-digit PIN code, and then press the ENTER
button.
If the correct code is entered, the program lock mode is
released and the normal picture appears. All locking will be
enabled again when you change the channel.
Usingtheinputlockfeature
You can use the Input Lock feature to lock the video inputs (Video,
ColorStream HD, HDMI 1, HDMI 2, and PC) and channels 3 and 4.
You will not be able to view the input sources or channels until you
unlock the inputs.
To lock/unlock the video inputs:
1 From the Locks menu, press the (y arrow) button to display
the PIN code entering screen.
2 Enter your four-digit PIN code, and then press the ENTER
button.
3 Press the (y arrow) button to highlight Input Lock, and then
press the ( _ arrow) button to select the level of video input
locking you prefer.
4 Press the EXIT button.
Mode.
Video
Video+
+OT_
Description:
LocksVideo,_t+[6+am +HD,HDMI_q+2+a_+P+C+:
LocksVideo,C+oi_+l:i+D, Mf1+ 727P+C+;. 8 ++
SelectVideo+if youplayvideotapesviaanANT/CABLEinput.
Unlocksallvideoinputsand_+a+n'n+e°_d+_i*
Lockingchannels
With the Lock feature, you can lock specific channels. Locked
channels can only be accessed by entering the PIN code, see
"Entering the PIN code" on page 80.
To lock channels:
1 From the Setup menu, highlight Installation, and then press
the ENTER button.
2 Press the ENTER button to select Terrestrial.
To Next Page
Loading...
