Toshiba 40L5400 Series - Page 22

22
Using the TV’s features
Using the Lighting Type
Set the ambient light environment to help
Intelligent Auto View function more e ectively.
• This can be set when Picture Mode is set to
Intelligent Auto View.
1 From the PICTURE menu, press  or  to
select Lighting Type.
2 Press  or  to select Fluorescent Light or
Light Bulb.
Adjusting the Colour Management
You can adjust the picture colour quality by
selecting from 6 base colour adjustments : Red,
Green, Blue, Yellow, Magenta or Cyan.
1 From the PICTURE menu, press  or  to
select 3D Colour Management.
2 Press  or  to select On.
3D Colour Management On
3 Press  or  to select Base Colour
Adjustment.
4 Press OK, then press  or  to select an item
you want to adjust.
Base Colour Adjustment
Hue Saturation Brightness
Red 0 0 0
000
000
000
000
000
Green
Blue
Yellow
Magenta
Cyan
Reset
5 Press , then press  or  to select Hue,
Saturation or Brightness.
6 Press  or  to adjust the settings as required.
Hue Saturation Brightness
Red 0 00
NOTE:
If you select 3D Colour Management O mode, this
mode is not available.
Resetting the Base Colour Adjustment
The reset function adjusts the base colour
adjustment to the factory settings.
1 From the Base Colour Adjustment menu, press
 or  to select Reset.
2 Press OK.
3 A con rmation message will appear. Press  or
 to select Ye s , and then press OK.
Using the Active Backlight Control
In order to improve screen visibility, the Active
Backlight Control sets the screen brightness
automatically during dark scenes.
1 From the PICTURE menu, press  or  to
select Active Backlight Control.
2 Press  or  to select On or O .
Using the Picture Analyser
Displays the picture histogram.
1 From the PICTURE menu, press  or  to
select Picture Analyser.
Histogram: Shows the bright and dark areas of
the displayed picture, and the distribution of
colours in a graph.
Contrast Curve: Shows the correction curve,
which improves the expressive feel of the
displayed picture, in a graph.
To close the Picture Analyser screen, press
EXIT.
32404755L5400SeriesEn.indd2232404755L5400SeriesEn.indd22 2014/07/2417:06:252014/07/2417:06:25