Toshiba 40L7363D - Connectors Type and Pins Assignment

Subject:
Product Engineering Specification
Part No.:
BK.01191.203
Rev.: 4
Doc. No.: 201-C005
Project Code:
BK.01191.001 Page 13 of 15
Model Name:
B191-203
Form No.:A-01-001-09(111107) 保存期限:最新狀態 保存單位:eGRNSystem
過期處置:背面紙
Release Notice
8. Connectors Type and Pins Assignment
8.1 Connected to Power Cord (CN1) A3963WR2-NP-D-PG
Pin No. Symbol
1 L
2 NC
3 N
8.2 Connected to Main Board (CN3) A2010WR0-16P-SW-5e-3.2
Pin No. Symbol Description
1,2,3 12.5V 12.5Vdc output for main board
4,5 GND_12V Power ground of 12.5V
6 12.5V_AUD 12.5Vdc output for main board
7
GND_12VAU
D
Power ground of 12.5VAUD
8.9 GND_12V Power ground of 12.5V
10 5V1 5.1Vdc output for main board
11 GND_5V1 Power ground of 5.1V
12 ACD
AC detection signal
Normal: 3.3V~5.5V
Abnormal: 0V~0.5V
13 Power_TV
On/Off control signal of main power system
On: 2.5V~5V
Off: 0V~0.5V
14 BL_ON_OFF
On/Off control signal of Backlight
On: 2.5V~5V
Off: 0V~0.5V
15 PWM2
On/Off control 3D mode of Backlight
On: 2.5V~5V
Off: 0V~0.5V
16 PWM1 EPWM dimming signal for Luminance control
8.3 Connected to LED Light Bar (CN2) A2010WR0-8P-SW-5e-3.2
Pin No. Symbol Description
1 Anode LED Anode
2 NC No connection
3 Cathode 1 LED Channel 1 Cathode
4 Cathode 2 LED Channel 2 Cathode
5 Cathode 3 LED Channel 3 Cathode
6 Cathode 4 LED Channel 4 Cathode
7 Cathode 5 LED Channel 5 Cathode
8 Cathode 6 LED Channel 6 Cathode