(1/6)
HOTEL MODE
ENTERING HOTEL MODE MENU
Hotel Mode Menu should be shown by the following operation.
1) Press any button on TV to activate Touch Sensor. White LED will light up.
2) Press
button once on the 3) Press button again and 4) While pressing the button,
Remote Control. keep pressing. press “+” button on TV.
(Hotel Mode Settings Menu)
DISPLAY OF HOTEL MODE MENU
- The Graphic Design and color of Hotel Mode Menu is the same as the User menu.
(Small differences which do not affect to operation will be acceptable)
- The language will follow the “Menu Language” setting in the menu
(Example of Menu Image)
OPERATING HOTEL MODE MENU
- To enable Hotel Mode, use the or arrow keys while “Hotel Mode” item is highlighted to select “On”.
Once Hotel Mode is on, the Hotel Mode settings will be enabled for adjusting.
- Use ▲ and ▼ buttons to access the hotel mode settings.
Use and buttons to change the settings.
See the table below for explanation of each setting.
- Press Exit when finished adjusting the settings.
To Next Page
Loading...
