Toshiba 40PU200 series - Movie File Playback and Controls; Navigating Movie Files; Playback Options and Settings

Viewing movie  les
You can select movies from a Multi View of
available  les.
Multi View
/C:
XXXXX XXXXX XXXXX XXXXXXXX.mpg XXXXXXXX.mpg XXXXXXXX.mpg XXXXXXXX.mpg
XXXXXXXX.mpgXXXXXXXX.mpg XXXXXXXX.mpg XXXXXXXX.mpg
Movie
1 Press , ,  or  to select a  le or folder. PU
/ Pu buttons can be used to page up/down the
Multi View when there are more  les than will
 t onto one screen.
2 When you select a folder, press Q to move to
the next layer. Press RETURN to move back to
the previous layer.
3 With the desired  le selected, press Q or 
(play) to start playback.
4 Press v to stop playback.
Note:
If playback  nishes before v is pressed, the screen will
return to the Multi View.
During playback:
• Press W to pause.
PAUSE may not be available depending on the
contents.
• To resume normal playback, press  (play).
• To play in fast reverse or fast forward directions,
press CC or cc during playback. Each time you
press the CC or cc, the playback speed will
change.
• Press z to skip to the beginning of the next
chapter. Double-tap it to skip to the next content.
Press Z to skip to the beginning of the current
chapter. Double-tap it to return to the previous
content.
If the content is not categorized into chapters,
press z to skip to the next content, or press Z to
skip to the beginning of the current content. Press
Z again to skip to the beginning of the previous
content.
• Press to display the  le status information
(content number, movie title, progress time etc.).
Notes:
• The information may not be correctly displayed
depending on the contents.
• During playback, you can adjust the PICTURE and
SOUND menu functions from the Quick Menu.
• The playback speed (CC / cc) may not change
depending on the stream.
To select subtitle and audio languages
• Press repeatedly to select your preferred
subtitle language.
• Press
s
repeatedly to select your preferred
audio language.
Note:
This feature is not available depending on the
contents.
Setting the repeat mode
1 Press QUICK to open the Quick Menu.
2 Press  or  to select Repeat.
3 Press  or  to select O , All or 1.
Mode Description
O The  le is played back only once.
All Files in the same folder are repeatedly
played back.
1 The same  le is repeatedly played back.
4 Press RETURN.
Resume Play
You can resume playback from where it was last
stopped.
Press v while playing the movie to memorize the
stopped position.
On the Multi View screen, if you select a movie
whose stopped position has been memorized, the
message “Resume Play?” will appear. Select Yes to
resume playback from the last stopped position.
Note:
If you play di erent content or exit Media Player, the
memorized stopped position will be deleted.
To close the Movie Viewer
1 Press EXIT.
File Compatibility
See page 24.
– 21 –
233240PU200SeriesEN0620.indd21233240PU200SeriesEN0620.indd21 2012/06/268:04:452012/06/268:04:45