45
Basic operation
Using Media Player with USB
When Auto Start is enabled, you will be asked if
you want to start the Media Player whenever a
USB device is inserted. If Auto Start is disabled (or
if you want to connect to a DMS on the network),
you must manually start the Media Player from the
menu.
To change the Auto Start setting:
1 From the APPLICATIONS menu, press V or U
to select USB Media Player and press Q.
2 Press V or U to select Setup.
3 Press V or U to select USB Auto Start and
press Y or Z to select On or O .
Auto Start:
1 Insert USB device into the USB socket on the left
side of the TV. A prompt will appear.
2 Press Y or Z to select Ye s and press Q.
3 Press V or U to select Photo, Movie or Music
and press Q.
4 Select the connected USB device and press Q.
Multi View will appear.
Note:
If USB Auto Start is set to O , you can start the Media
Player manually.
Manual Start:
1 Insert USB device into the USB socket on the left
side of the TV.
2 From the APPLICATIONS menu, press V or U
to select USB Media Player and press Q.
3 Press V or U to select Photo, Movie or Music
and press Q.
4 Select the connected USB device and press Q.
Multi View will appear.
To select a le in the Multi View:
1 Press V, U, Y or Z to select a le or folder.
2 Press Q to move to the next layer, or press
BACK to return to the previous layer.
Connecting your TV
Note:
You can also return to the previous layer by selecting
the icon at the top left of the Multi View screen and
pressing Q.
To close the Media Player:
1 Press EXIT.
Using the Media Player with a DLNA CERTIFIED™
Server
You need to con gure a home network before using
this feature (- page 37).
1 From the APPLICATIONS menu, press V or U
to select Network Media Player and press Q.
2 Select the server you want to use and press Q.
Multi View will appear.
Multi View (DMS)
///Folder name
5/100
Back
xxxxxxxxx.mp3xxxxxxxxx
xxxxxxxxx.mp3xxxxxxxxx.mp3
Network Media Player
xxxxxxxxx.jpg
xxxxxxxxx.jpg
xxxxxxxxx.jpg
xxxxxxxxx.jpg
xxxxxxxxx.mpgxxxxxxxxx.mpgxxxxxxxxx.mpg
Photo, Movie and Music les and folders are
displayed in the Multi View (DMS).
To select a le in the Multi View:
1 Press V, U, Y or Z to select a le or folder.
2 Press Q to move to the next layer, or press
BACK to return to the previous layer.
Note:
You can also return to the previous layer by selecting
the icon at the top left of the Multi View screen and
pressing Q.
Files are displayed according to the type rst
selected (Photo, Movie or Music).
e.g. If you rst selected a Photo le, only Photo les
will be displayed.
To close the Media Player:
1 Press EXIT.
To Next Page
Loading...
