43
HL117 (E/F) Web 213:276
Chapter 6: Using the TV’s features
Selecting the cinema mode
(480i and 1080i signals)
When you view a DVD (3:2 pulldown processed) from a DVD
player connected to the VIDEO 1, VIDEO 2, ColorStream
HD-1, ColorStream HD-2 (component video), or HDMI
inputs on the TV, smoother motion can be obtained by setting
the Cinema Mode to Film.
To set the Cinema Mode to Film:
1 Press Y and open the Video menu.
2 Highlight Theater Settings and press T.
3 In the Cinema Mode field, select Film.
4 To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
To set the Cinema Mode to Video:
Select Video in step 3 above.
Adjusting the picture
Selecting the picture mode
You can select your desired picture settings from five different
modes, as described below.
Note: The Document mode is available for HDMI input sources
only (grayed out for other input sources).
To select the picture mode:
Press u on the remote control.
The following popup menu appears on-screen.
Press B or b to select the picture mode you prefer and
press T.
To select the picture mode using the menu system:
1 Press Y and open the Video menu.
2 Highlight Mode and press T.
3 Press B or b to select the picture mode you prefer and
press T.
Note: The picture mode you select affects the current
input only. You can select a different picture mode for
each input.
Theater Settings
Picture Size Natural
Picture Scroll --
Cinema Mode Film
Auto Aspect Ratio On
DoneReset
Mode: Sports
Mode Picture Quality
Sports Bright and dynamic picture (factory setting)
Standard Standard picture settings (factory setting)
Movie
Lower contrast for darkened room (factory
setting)
Document
Designed for viewing of tables/documents
from a PC (factory setting)
Preference Your personal preferences
Sports
Standard
Movie
Document
Preference
Mode
Picture Settings
Noise Reduction
Video
Game Mode
Theater Settings
Off
Sports
TheaterLock
Off
Sports
Standard
Movie
Document
Preference
42HL117_EN.book Page 43 Friday, July 13, 2007 3:06 PM