7. CMOS-LSI circuitry is used in the LCD module, so avoid damage due to static electricity. When handling the module, use a
wrist ground or anchor ground.
8. Do not expose the LCD module to direct sunlight or strong ultraviolet rays for extended periods.
9. Do not store the LCD module below the temperature conditions described in the specifications. Doing so could result in
freezing of the liquid crystal, loss of resilience, or other damage.
10. Do not disassemble the LCD module. Such actions could result in improper operation.
11. When transporting the LCD module, do not use packing containing epoxy resin (amine) or silicon resin (alcohol or oxim).
The gas generated by these materials can cause loss of polarity.
4
To Next Page
Loading...
