8
Stand assembly instructions
23HL900A
Please take out parts according to the
instruction printed on the box
x 5
Parts included in box
x 1
CAUTION: Before beginning pedestal assembly, carefully lay the front of the LCD panel face down on a flat, cushioned
surface such as a quilt or blanket. Leave the bottom of the unit protruding over the edge of the surface and assemble as
indicated above. Avoid using chemicals on or near TV pedestal or serious injury could result.
Note: Extreme care should always be used when attaching the pedestal stand to avoid damage to the LCD panel.
Warning: To prevent possible electric shock, protect the power cord from being pinched when attaching the pedestal stand.
3
4
x 1
x 4
To Next Page
Loading...
