(6/18)
On (AC) TV tunes to preset “POS/VIDEO”
(channel or input) only when AC
power is applied.
When TV is powered on by power
button, tune to the last channel or
input.
Off TV Tunes to the last channel or input
viewed when powered on
POS/INPUT/VIDEO
(*Only available when
“Change POS/VIDEO”
is [On].
*The satellite is not
included in this
selection.)
* The input which does
not exist on the model
should not be shown.
(eg. “DTV” is not
shown on ATV
models.)
ATV ATV ATV - Grayed out when Hotel
Mode = [Off]
- Grayed out when
"Change POS/VIDEO" =
[Off]
DTV DTV
EXT1 EXT1
EXT2 EXT2
EXT3 EXT3
HDMI1 HDMI1
HDMI2 HDMI2
HDMI3 HDMI3
HDMI4 HDMI4
PC PC
ATV/DTV POS
(*Only available when
"POS/INPUT/VIDEO"
is ATV or DTV.)
ATV 0-99 0 - Grayed out when Hotel
Mode = [Off]
- Grayed out when
"POS/INPUT/VIDEO" =
not [ATV/DTV]
- (For Only DTV) Grayed
out when there is no
acquisition channel in the
DTV channel list
DTV Number of channel list
*The channel not acquired is not set.
(The value is not preserved and
returns to the origin when the
channel not acquired is set.)
*A set value returns to default after
the Auto/Manual tuning.
*A set value returns to default if the
set channel is deleted.
*A set value returns to default if
Channels-Renumber is executed.
* If the same channel number as
(1)TV Channels, (2) Radio Channels
and (3)Text Channels in DTV exist, it
is set by the priority level of (1), (2),
and (3).
The first
number of
channel list
SCART Pin8 On Pin8 will go on normal operation. On - Grayed out when "Hotel
Mode" = [Off]
Off Pin8 is ignored.
To Next Page
Loading...
