Toshiba 42SL700A - Channel Editing and Fine Tuning

18
Getting started
Channel Sort
Change the order of the programme list.
1. Select Channels from the SETUP menu.
2. Highlight Channel Sort and press ► or to select.
3. Pressing to check two channels to swap the
positions.
Channel Sort
Select Back Exit
EXIT
Set
OK RETURN
1 Digital TEN HD 123456789 abcdefgh...
2 Digital ABC HDTV
3 Digital TEN Digital 123456789 abc...
4 Digital TEN HD 123456789 abcdefgh...
5 Digital ABC1
6 Digital ABC1
7 Digital ABC2
8 Digital ABC3
9 Digital ABC DiG Radio
10 Digital ABC DiG Jazz
Channel Edit
Edit the channel number and channel name.
1. Select Channels from the SETUP menu.
2. Highlight Channel Edit and press ► or to select.
3. Press ▲ or ▼ to highlight the channel and press
to select.
4. Change the Channel Number by using the number
buttons 0~9. Change the Channel Name by using
the number buttons 0~9 to enter numbers and
letters.
Note: The Colour System/Sound System can be
changed only in Analogue TV.
Network Name: ABC Sydney
2
ABC HDTV
B/G
Auto
191.5
Channel Number:
Channel Name:
Frequency
Colour system
Sound system
Channel Edit
Select Back Exit
EXIT
Set
OK RETURN
Analogue Channel Fine Tune
When the reception is poor, you can use this function to
do the fine tuning.
1. In the SETUP menu, press ▲ or ▼ to highlight
Channels and press ► or
to select.
2. Press ▲ or ▼ to highlight Analogue Channel Fine
Tune and press
to select.
3. Highlight and press to select the channel.
4. Press ◄ or ► to adjust the frequency. Press ◄ to
decrease and ► to increase the frequency.
Analogue Channel Fine Tune
1
2
3
4
5
6
7
8
9
BBC 1
RTP1
-----
-----
-----
-----
-----
-----
-----
10 -----
687.25 MHz
175.25 MHz
55.85 MHz
209.25 MHz
223.2 MHz
572.3 MHz
590.25 MHz
623.25 MHz
759.2 MHz
772.2 MHz
Select Back Exit
EXIT
Adjust
OK
RETURN
Automatic Power Down
The TV will automatically turn itself off (standby) after
approximately 4 hours, if you do not touch the control
buttons on the remote control or on the TV control panel.
1. In the SETUP menu, press ▲ or ▼ to highlight
Automatic Power Down.
OSD Language
Channels
Automatic Power Down
Location
System Information
Parental
SETUP
Home
On
English
Select Back Exit
EXITRETURN
Reset TV
2. Press ◄ or ► to select On or Off.
Reset TV
Selecting Reset TV will reset all TV settings to their
original factory default settings, excludes OSD Language
and Channels.
1. In the SETUP menu, press ▲ or ▼ to highlight
Reset TV and press ► or
to select.
OSD Language
Channels
Automatic Power Down
Location
System Information
Parental
SETUP
Home
On
English
Select Back Exit
EXITRETURN
Reset TV
2. Select OK to confirm, or select Cancel to exit.
Previous settings will be lost! Press
Cancel for no change. Press OK to
continue.
OK Cancel