Toshiba 42SL800A - Page 18

18
G.Searchoperation
Press
r
to search up the band or
s
to search
down the band�
Press
s
or
r
repeatedly until your desired
channel is displayed�
NEVER PRESS ANY OTHER BUTTONS
WHILE THE SET IS TUNING�
H.ManualFineTuning
Press
s
or
r
until better picture and sound are
obtained�
I.Label
Station labels appear beside the position display
each time you turn on the TV, select a channel, or
press
�
Tochangeorcreatestationlabels:
1) Press
s
or
r
repeatedly to select a character for
the rst space, then press
w
�
*(blank space)
2) Repeat step 1) to enter the rest of the characters�
If you would like a blank space in the label
name, you must choose a blank space from the
list of characters�
Press
OK
to store your settings�
Sorting positions
- analogue -
ATV channels may be moved and stored to the position of
your choice�
1
From the
SETUP
menu, press
s
or
r
to select
ATV
Manual Tuning
�
2
With the list of channels now showing, press
s
or
r
to select the channel you want to move and press
w
�
Pos. Label
ATV Manual Tuning
2
3
4
5
6
7
8
1
ABCD
EFGH
IJKL
MNOP
Channel
C2
C4
C5
C7
C12
C23
C27
C9
3
Use
s
or
r
to move through the list to your preferred
position� As you do so, the other channels will move
to make room�
4
Press
v
to store your move�
Repeat as necessary and press
EXIT
�
DTV Manual Tuning
- digital -
This feature is available for service engineers or can be used
for direct channel entry if the multiplex channel is known�
1
From the
System Setup
menu, press
s
or
r
to
select
DTV Manual Tuning
and press
OK
�
DTV Manual Tuning
WEAK
Signal Strength
Quality
Channel
GOOD
Start Scan
STRONGAVERAGE
22
Frequency
XXX.X MHz
Bandwidth
7MHz
2
Enter the multiplex number using the number buttons
or press
v
or
w
to adjust the number up or down�
Press
s
to select
Bandwidth
, press
v
or
w
to select
7MHz
,
8MHz
or
7MHz and 8MHz
(
-
page 69)�
Then press
s
to select
Start Scan
and press
OK
�
The TV will start to search for that multiplex�
Pos. Name
0 New Channels - Total 6
DTV Manual Tuning
20
2
21
22
23
TypeNew
When the multiplex is found, any channels that are
not currently in the channel list will be added and the
channel information will be updated�
3
Repeat as necessary� Press
EXIT
to nish.
Sorting Channels
- digital -
The channel order may be changed to suit your personal
preference�
1
From the
System Setup
menu, press
s
or
r
to
select
DTV Settings
and press
OK
�
2
Press
s
or
r
to select
Channels
and press
OK
�
DTV Settings
Channels
Parental Control
Parental PIN Audio
Subtitle and Audio
Local Time Setting
Standby Channel Update On
Dynamic Scan On
3
For your convenience, you can jump to specic places
in the list by one of the following methods�
Getting started
110809c1_324246SL800A_En.indb 18 11.8.9 9:04:51