Toshiba 42SL800A - Selecting the PC;HDMI 3 audio mode; Selecting the HDMI settings

44
Connecting your TV
Standard analogue audio cables
An HDMI-to-DVI adapter cable transfers only video�
Separate analogue audio cables are required�
Selecting the PC/HDMI 3 audio mode
You can select PC audio or HDMI 3 audio when using this
function�
1
From the
Preferences
menu, press
s
or
r
until
AV Connection
is selected�
Off
Preferences
Network Lock
Panel Lock
Display Settings
AV Connection
Energy Saving Settings
Clock Display
Blue Screen
Off
Off
On
Off
HDMI Information Display
2
Press
OK
to display the
AV Connection
menu�
AV Connection
PC/HDMI 3 Audio
HDMI Settings
HDMI 3 Audio
Digital
Digital Audio Output
PC
Input Labeling
3
Press
s
or
r
to select
PC/HDMI 3 Audio
and press
v
or
w
to select
PC
or
HDMI 3
�
Setting the HDMI 3 audio mode
You can select from three sound modes for an HDMI or
DVI device connected to the HDMI 3 input terminal:
Auto
,
Digital
or
Analogue
�
Note:
This function is available only when the PC/HDMI 3
Audio mode is set to
HDMI 3
.
1
From the
AV Connection
menu, press
s
or
r
to
select
HDMI 3 Audio
�
2
Press
v
or
w
to select
Auto
,
Digital
or
Analogue
�
Selecting the HDMI settings
The HDMI Settings menu consists of the following 3
items:
Enable Content Type
,
INSTAPORT™
and
RGB Range
� Some early HDMI equipment may not
work properly with your HDMI TV� If you experience
trouble, unplug your HDMI cable rst and try setting
the rst two options to
Off
� This should allow your early
HDMI source to operate properly with your TV�
1
From the
AV Connection
menu, press
s
or
r
to
select
HDMI Settings
and press
OK
�
HDMI Settings
INSTAPORT
TM
Enable Content Type
RGB Range
On
On
Auto
2
Press
s
or
r
to select each item and press
v
or
w
to
select the desired setting�
Enable Content Type mode
This feature accepts the content type data from the
connected HDMI device�
INSTAPORT™ mode
This feature reduces the lag time when switching HDMI
sources�
RGB Range mode
This feature adjusts RGB full range signal automatically (if
Auto is selected)� When
Limited
is selected, RGB output
signal is output in the range from 16 to 235� When
Full
is
selected, RGB output signal is output in the range from 0
to 255�
Notes:
• If your HDMI connection is capable of 1080p and/
or your TV is capable of refresh greater than 50 Hz
or supports Deep Colour, you will need a Category
2 cable.
• All of the above HDMI settings need proper HDMI
source devices. If the HDMI source products do
not support these features, the TV may not work
properly by activating these features.
110809c1_324246SL800A_En.indb 44 11.8.9 9:05:00