REGZA-LINK connection
You can control the basic functions of connected audio/video devices using the TV’s remote control if you connect a REGZA-
LINK compatible audio receiver or playback device� For an explanation of setup and operations, see pages 33, 34�
Connection example
Before controlling the device(s):
• After completing the above connections, set
the
REGZA-LINK
Setup
menu as you desire
(
-
page 33)�
• The connected devices must also be set. For details, see
the owner’s manual for each device�
Notes:
• If several devices are connected, the REGZA-LINK
feature may not operate properly.
• The REGZA-LINK function uses CEC technology
as regulated by the HDMI standard.
• For proper operation, it is recommended that you
use HDMI cables with the HDMI Logo (
).
• This function is limited to models incorporating
Toshiba’s REGZA-LINK. However, Toshiba is not
liable for those operations. Refer to the individual
owner’s manuals for compatibility information.
• This function is able to operate one PC and one
AV amplifier, but the PC may not operate properly
with the AV amplifier. Some PC models may not be
controlled properly by the TV.
To Next Page
Loading...
