Note:
Other items will be greyed out when
Auto Setup
is
set to
On
.
Manual Setup:
1
From the
Preferences
menu, select
Network
Setup
and press
OK
�
2
Press
s
or
r
to select
Advanced Network Setup
,
and press
OK
�
3
Press
s
or
r
to select
IP Address Setup
, and
press
OK
�
4
Select
Auto Setup
and press
v
or
w
to select
Off
�
5
Press
s
or
r
to select
IP Address
�
6
Press
v
or
w
to select the eld you want to change
and use the number buttons to input the IP address� To
save the setting, press
OK
�
Note:
IP address field numbers must be between
0 and 255. After each field number has been
set, press
OK
to store the entire address. If the
entire IP Address is invalid, a warning message
will appear after
OK
is pressed.
7
Press
s
or
r
to select
Subnet Mask
, and edit in the
same way as IP Address�
8
Press
s
or
r
to select
Default Gateway
, and edit
in same way as
IP Address
�
Note:
If you manually set the IP address, you must not use
the same IP address for any other device. The IP
address you use should be a private address.
DNS Setup
When the DHCP function of the router connected to this
TV is Off, set
Auto Setup
to
Off
, and manually set the
DNS address(es). Your internet service provider should
have provided these to you�
Auto setup:
1
From the
Preferences
menu, select
Network
Setup
and press
OK
�
2
Press
s
or
r
to select
Advanced Network Setup
and press
OK
�
3
Press
s
or
r
to select
DNS Setup
and press
OK
�
4
Select
Auto Setup
and press
v
or
w
to select
On
�
Note:
Other items will be greyed out when
Auto Setup
is
set to
On
.
Manual setup:
1
From the
Preferences
menu, select
Network
Setup
and press
OK
�
2
Press
s
or
r
to select
Advanced Network Setup
and press
OK
�
3
Press
s
or
r
to select
DNS Setup
and press
OK
�
4
Select
Auto Setup
and press
v
or
w
to select
Off
�
5
Press
s
or
r
to select
Primary DNS Address
�
6
Press
v
or
w
to select the eld you want to change
and use the number buttons to input the Primary DNS
Address� To save the setting, press
OK
�
Note:
DNS address field numbers must be between
0 and 255. If you input an incompatible number
and press
OK
, the field number will reset to the
previous value.
7
Press
s
or
r
to select
Secondary DNS Address
,
and edit in the same way as Primary DNS Address�
MAC Address
You can view the xed MAC address for the TV.
1
From the
Preferences
menu, select
Network
Setup
and press
OK
�
2
Press
s
or
r
to select
Advanced Network Setup
and press
OK
�
To Next Page
Loading...
